I am selling my Nikon version Pocket Wizards - theses are the latest TTL versions.
1 x Mini TT1 Transmitter (this fits on the hot shoe of your camera)
2 x Flex TT5's Transceivers - these are for your remote flash units - they are compatible with the Nikon SB600, SB700, SB800 and SB900.
The Mini TT1 supports the standard Nikon CLS AB or C Channel structure - and you can even mount an SU800 as a Commander unit on top of the Mini TT1 to control flash ratios etc (you could also do this with an SB800 or SB900). The AC3 ratio controller has also just been released for the Nikons and this is a much cheaper way of controlling ratios than using a dedicated Master Commander unit on top of the MiniTT1 (they are only 60 quid)
Supports iTTL and High Speed Sync using Pocket Wizards own technology which allows higher levels of output during high speed sync.
Fully compatible with older Pocket Wizards for manual flash modes.
These were purchased in December so are still under warranty and have the latest firmware loaded.
Cost new from Warehouse Express was £549 as a bundle deal for the three units.
All are in good working order and still boxed with all leads manuals etc - however the hotshoe on the bottom of one of the FlexTT5's (the bit that goes on a flash stand) has had the plastic guides chipped where it slides into a cold shoe - however this doesn't affect the functionality as they also have a thread on the bottom of them for mounting on a light stand (which is what I use). The part costs £40 to replace yourself or you can get the distributors to do it for about £70 - Lovegrove gives details here
http://www.lovegroveconsulting.com/pw_hot_shoe_blocks.aspxSo I was going to offer them at £450, but I'll take off the price of the hotshoe repair (bear in mind the unit still works okay) and I'll sell them for £380 for the set.
Payment by bank transfer and will be shipped by PO Special Delivery.
PM me if interested, or if you have any questions.